600w x 12v or 500w x24v Motors are permanent magnet, European manufacture
Drum
High tensile bronze, chrome plated
Deckplate
Marine grade hard anodised and sealed aluminium
Gearbox
Three stage balanced epicyclic
Deck studs
Supplied with nuts in stainless steel
Weight
7kg (13lbs)
Clearance
Per diagram below, longer or shorter studs can easily be fitted
Rotation
Clockwise or right hand as viewed from above Reverse rotation to special order.
Brake
Auto action roller clutch - will not run back
Cable Size
Boats to 12 metre (36ft) use 25 mm2 - 2awg
Accessories
Footswitch supplied as an option.
Covered switch with flip top cover available as an option.
Slow reaction circuit breaker supplied as an option.
Winch sizing
There are no absolute rules about winch size to boat size. This product is designed for use on typical private pleasure craft . Winch / boat sizes shown are based on installations that have proved satisfactory for many years.
For general purpose lifting and hauling where the speed of an anchor capstan is not required
"Steady" pull indicates load area in which the winch should mostly be operated. The "Snatch" pull is a maximum momentary pull the winch is capable of.Performance:
Pull
Rating
Speed
Current
Volts
Back to top
Technical Details:
Motor
Drum
Deckplate
Gearbox
Deck studs
Weight
Clearance
Rotation
Brake
Cable Size
Accessories
Covered switch with flip top cover available as an option.
Slow reaction circuit breaker supplied as an option.
Winch sizing
Back to top