Simpson Lawrence: "A"

Features:

• Short shaft with flats
• One or two screw terminals
• Top flange in bronze
• Shaft rotates clockwise only

 

---

Used in Simpson Lawrence models:

• C500, C1250 Rope capstans
• V1500, V2000, PP1000 Chain windlasses- power in only.

 

---

 

Information:

You must count the number of teeth on the gear that fits on the motor shaft and order the correct adaptor kit and motor below.

• 15 tooth gear kit : P/n 436112 or 18 tooth gear kit : P/n 436119
• 12 volt motor : P/n 336020 or 24 volt motor : P/n 336021

Important! The above winch drives run clockwise only as viewed on top of the winch. When wiring up test to ensure the polarity is correct. New motor terminals may vary from old installation. Use "Loctite" screw locking compound or similar on all screws.
 
After installation and testing of your new motor, protect with a coating ofCRC "Softseal" or similar and check regularly.
 

---