Simpson Lawrence: "C"

Features:

• Long shaft with key
• Two screw terminals
• Top flange in aluminium with four screw holes
• Shaft rotates both ways

 

---

 

Used in Simpson Lawrence models:

• C500, C1250, rope capstans
• V1500, V2000, PP1000 chain windlasses- power "up" only

 

---

 

Order adaptor kit and motor below

• Adaptor kit: P/n 436116
• 12 volt motor : P/n 336020 or 24 volt motor : P/n 336021

 

---

 

Information:

You must count the number of teeth on the gear that fits on motor shaft and order adaptor kit and motor below

• 15 tooth gear kit: P/n 436112 or 18 tooth gear kit : P/n 436119
• 12v motor : P/n 336020 or 24v motor : P/n 336021

If your V1500, V2000 or PP1000 winch is powered in both "up" and "down" modes:


Important! While motor is disconnected, check brake operation by applying DC power to brake terminals. When power is applied, it should be possible to turn the winch using a large bladed screwdriver. If brake does not release, it may need servicing. Remember when installing new motor, to wire in brake across motor terminals. Direction of motor rotation may be changed by switching main terminals from side to side.Use "Loctite" screw locking compound or similar on all screws.

After installation and testing of your new motor, protect with a coating of CRC "Softseal" or similar and check regularly
 

---